1. Notes on the operation of bakelite

Quickly evacuate personnel from the contaminated area to a safe area, and isolate them, strictly restricting access. Cut off the ignition source. It is recommended that emergency personnel wear self-contained positive pressure respirators and anti-static overalls. If it is liquid. Cut off the source of the leak as much as possible. Prevent inflow into restrictive spaces such as sewers and flood ditches. Small leaks: Absorb with dry sand or similar substances. Large amount of leakage: constructing dikes or digging pits to contain. Cover with foam to reduce steam hazards. Use an explosion-proof pump to transfer to tank truck or special collector, and recycle or transport to waste disposal site for disposal. If it is solid, collect it in a dry, clean, covered container. Then bury it deep in a dedicated abandoned place. If there is a large amount of leakage, collect and recycle or transport to waste disposal site for disposal. Handling and storage

2. Precautions for bakelite powder transportation

Transportation vehicles should be equipped with the corresponding variety and quantity of fire fighting equipment and leakage emergency treatment equipment. In summer, it is best to transport it sooner or later. The tank (tank) truck used for transportation should have a grounding chain, and hole partitions can be set in the tank to reduce vibration and static electricity. It is strictly prohibited to mix and transport with oxidants and edible chemicals. It should be protected from exposure, rain and high temperature during transportation. When staying on the way, keep away from fire, heat source and high temperature area. The exhaust pipe of the vehicle carrying the article must be equipped with a fire retardant device, and it is forbidden to use mechanical equipment and tools that are prone to sparking for loading and unloading. It is forbidden to slip off during railway transportation. It is strictly forbidden to transport in bulk by wooden boat or cement boat.